Hello.
I'm writing my first review, I haven't done this before, so I'm sorry if there's anything wrong with the text.
This service station was recommended to me, I called, drove the car, sandblasted and anticorrosion, the masters looked at it and immediately charged the price to the maximum, I agreed, asked only to treat the repair with high quality, and make the car for myself, promised to thank the guys!!!
During the repair, more questions about welding popped up, etc, I perceived everything adequately, I asked the craftsmen to do it efficiently.
I took the car, externally, visually and with the words everything was done with a bang !!!
But then I went to another service station to make a running gear, the guys looked there and then it started:
- they were brushed off and filled in just for dust in the eyes, hidden cavities, under the bumper, thresholds, the frame from the inside was not treated at all!!!
- the car was not filled with anthocor at all, only along the bottom and not all, hidden and closed places were left untreated!!!
- I came 2 times and asked to be removed and that's it fix it and fill it in, yes, they seemed to fill it in, they tried to fix it, but why not do it all at once and well, why is it so obscene and blundering!!!!
- after all the fixes, I went to the painter for painting, he took off the elements as he looked, so he was ready to go to these mountain craftsmen and swear, blew sand out of the car for a day, after his work he processed the hidden elements and cavities for me again!!
Guys, and in conclusion, I highly do not recommend this service station there is no quality and trust , although I have repeatedly asked and paid attention to this, I even wanted to thank the guys and encourage them, but in the end it's complete nonsense, money, time, nerves spent!!!!!
And for everyone, I'm not writing this, I'm not snapping or incognito!!
Novel!!!
I am ready to personally tell and share information and photos!!!
Well, it's time to write a review. The test of time has passed. Pros: everything that was cooked, cooked well. It holds, these 10 lats. Cons: if it was agreed to boil all the problem areas of the bottom, and 3000r. it seems to me that the amount is sufficient for this, then you probably need to boil everything. half of the beams crumbled into dust, something tells me that it could have been detected at that time, by tapping with a hammer. It looks very much like it was an attempt to get off as quickly as possible, and to take money "for everything". I, as a customer, should not walk with you under the lift? If I gave you the car, I trust you, so do as agreed, or if it's more expensive, tell me the price tag for everything at once. The contract was as follows: to brew all the problem areas (beams, poddomkratniki, amplifiers, floor), but 10 lats, for 1000 cu. it looks like fraud. I recommend that everyone, if possible, check the work in all possible ways.
+ the guys are all polite, they treat their work with understanding, I know my job, they do everything well, thank you.
See original · Русский
Show business's response
A
Alex Mir
Level 3 Local Expert
August 6, 2024
Good day to everyone. I do not advise you to go to these masters.
Because of the attitude to their work.
I made a car from them. Overcooking thresholds. The thresholds were not bought stamped, but under the original. The number of doors was negotiated.
Everything has been stipulated, thresholds, end caps in arches, poddomkratniki, possibly useliteli.
Arriving to pick up, one threshold was welded with a hump, pushed back the wing, just shoved under the wing. The doors were not removed.
They said they digested everything.
The hump was fixed.
Arriving at the garage, I think, let me wash the mastic and see what happens.
The end caps are on the snot, they are not welded to the threshold at all, the filler has not been cooked, everything is smeared on, and one movement breaks off.
I had to redo everything, wash it, peel it off and do it right.
The job is done, but with a bad approach.
A normal institution, cooked the thresholds of the footrests and front spars, made a 20p discount, do all kinds of work, do not paint, process mercasal!
Prices from space, for two thresholds without taking into account the cost of materials from 1000r, for rear arches from 700r, more + material, I do not recommend.
Customer-oriented service. I turned to them for various reasons. Twice I did anti-corrosion treatment of the body, as well as changed the corrugation of the muffler. They provide all services professionally.
I recommend.
I only refer to them for welding. In terms of quality and cost, everything is fine. The only thing is that the exhaust is only boiled on Saturdays, but it's not scary.
The arches were digested here. The quality is disgusting, not only do the bumper and arches live their own separate lives, but also the gaps are a wave. I strongly advise against it.